Tarmac Laying Contractor in Poling

Tarmac Laying Contractors in Poling — what to expect

If you are considering a new tarmac driveway, a path, or a private road in Poling, the process usually begins with a careful assessment of the ground beneath, where a well-compacted MOT Type 1 sub-base is essential to prevent future settlement. Most local contractors will then lay an AC 20 binder course, followed by an AC 10 surface course, using a roller for proper compaction rather than relying on a plate compactor alone, which is better suited to smaller areas like garden paths. For an existing but worn surface, a plane and overlay is a common and cost-effective approach, where the top layer is milled off, a tack coat is applied to ensure adhesion, and fresh tarmac is laid over the top. Edge restraint kerbs are often installed to give the finished driveway a crisp, defined border and to stop the material from spreading, while dropped kerbs at the boundary will need to be arranged through West Sussex County Council if they are not already in place. Proper driveway drainage is another point that a reputable contractor in the BN18 area will raise, as standing water can shorten the life of the tarmac, and a simple fall or a linear channel drain is usually the answer. Some properties in and around Poling also opt for a tar and chip finish for a more textured, gravel-like appearance, which can work well on a longer private road. Whichever route you take, it pays to have a couple of local firms come out to measure up and give you a written specification, so you can compare quotes at your leisure.