Tarmac Laying Contractor in Tye

Tarmac Laying Contractors in Tye — what to expect

Around Tye and the surrounding villages, the process of laying a new tarmac driveway or resurfacing an existing one is a job that rewards careful preparation and honest materials. Contractors working in the PO11 area will typically start by excavating the old surface, then bringing in a MOT Type 1 sub-base, which is spread and compacted with a plate or roller to create a firm, level foundation. From there, the AC 20 binder course goes down first, followed by the AC 10 surface course, which gives that familiar dark, smooth finish. If your drive has seen better days but the base is still sound, a plane and overlay is often the more economical route—this is where the worn top layer is milled off, a tack coat is applied to help the new asphalt bond, and a fresh surface is laid without disturbing the ground beneath. Edge restraint kerbs are usually set along the borders to keep the material in place and give a crisp line, while dropped kerbs are a separate consideration if you need vehicle access from the road, and driveway drainage should be planned so surface water doesn’t pool or run across the pavement. For paths and private road surfacing, the same principles apply, though the depth of the sub-base and the choice of tar and chip might vary depending on traffic and use. If you’re thinking about having work done in Tye, whether it’s a modest path or a longer private road, it’s worth having a couple of local contractors look at the ground first—then simply compare quotes before deciding.