Tarmac Laying Contractor in Lee-on-the-Solent

Tarmac Laying Contractors in Lee-on-the-Solent — what to expect

When it comes to laying a new tarmac driveway in Lee-on-the-Solent, the local ground conditions and coastal weather mean the preparation work matters as much as the final surface. A proper job typically starts with excavating the soft topsoil and bringing in a well-compacted MOT Type 1 sub-base, which is then levelled and whacked down with a plate compactor before any binder is applied. From there, contractors in the PO13 area will usually lay an AC 20 binder course, followed by an AC 10 surface course, with each layer rolled to achieve that smooth, hard-wearing finish that stands up to the salt air and occasional downpours. For existing drives that have sunk or developed cracks, a plane and overlay approach is often the more economical route, where the old tarmac is skimmed off and a fresh tack coat is applied to ensure the new layer bonds correctly. Edge restraint kerbs are worth considering, too, as they keep the tarmac from feathering at the borders, and if you need access from the road, dropped kerbs must be arranged through the local highways authority before any work begins. Paths and private roads in Lee-on-the-Solent are treated in much the same way, with the same attention to drainage and falls so water runs off rather than pooling. Some homeowners also ask for a tar and chip finish for a bit of texture, though plain tarmac remains the most common choice across Hampshire. Whether you are resurfacing a short garden path or a long shared drive, the sensible next step is to compare a few local quotes and see which contractor’s approach feels right for your property.